1066 - Corner "Bullet" Inner Bed Retractable Tie-Down Anchors | 2009-2020 Dodge Ram |
Specially designed to fit the oval holes in the corner sidewalls of 2009-2020 Dodge RAM Trucks.
Bull Ring’s are the premium tie-down anchor point for your truck. Our retractable bullet anchor points easily install into the 4 corner pockets that line the walls of Dodge truck beds. Installation is easy – No drilling, no special tools and no hassles. The retractable anchor ring lifts up and out at a 35° angle to match the angle used when securing loads with ratchets or rope, then hit it down flush when it’s not in use. Each is made from stainless steel for a 1000 lbs capacity, and comes with our “no bull” Lifetime Warranty. Sold as a pair (2 anchors)
Fitment
09-18 Dodge RAM Trucks work in all four corners, 19-20 Dodge RAM Trucks only work in the front two corners.
Installation
Installation is simple, so there is no drilling, no special tools, and no hassles. To install them, pull on ring to snap to fully extended position. Then remove the screw and insert the black base into the hole. Position Bull Ring to one side of opening, and push the edge of the stainless backing plate into the hole. As you center be sure the backing plate goes inside the hole and behind the wall. With the backing plate behind the wall, center on opening, and pull outward while you install the screw.
Important note- Please check Images to see special Bracket on some select models which prevents installation. This product does not fit in the applied bracket as shown in Images. Call 888-879-2855 for any questions regarding installation.
Specially designed to fit the oval holes in the corner sidewalls of 2009-2020 Dodge RAM Trucks.
Bull Ring’s are the premium tie-down anchor point for your truck. Our retractable bullet anchor points easily install into the 4 corner pockets that line the walls of Dodge truck beds. Installation is easy – No drilling, no special tools and no hassles. The retractable anchor ring lifts up and out at a 35° angle to match the angle used when securing loads with ratchets or rope, then hit it down flush when it’s not in use. Each is made from stainless steel for a 1000 lbs capacity, and comes with our “no bull” Lifetime Warranty. Sold as a pair (2 anchors)
Fitment
09-18 Dodge RAM Trucks work in all four corners, 19-20 Dodge RAM Trucks only work in the front two corners.
Installation
Installation is simple, so there is no drilling, no special tools, and no hassles. To install them, pull on ring to snap to fully extended position. Then remove the screw and insert the black base into the hole. Position Bull Ring to one side of opening, and push the edge of the stainless backing plate into the hole. As you center be sure the backing plate goes inside the hole and behind the wall. With the backing plate behind the wall, center on opening, and pull outward while you install the screw.
Important note- Please check Images to see special Bracket on some select models which prevents installation. This product does not fit in the applied bracket as shown in Images. Call 888-879-2855 for any questions regarding installation.
